此機為雙頭跑步帶熔接機，兩個工作頭交替工作，提高生產效率，高周輸出穩定，成品率高。壓出的跑步皮帶熔接牢固，美觀。保持接合平整原皮樣, 特點：1.使用*自動同調系統。只要預先設定好膠合電流值和時間，本系統會根據電流的反饋信號自動調節，膠合電流不會受到厚薄的變化和模具溫度上升的影響。因此產品質量穩定，一般操作人員即可輕松擔任，不像普通射擊頻膠合機，材料厚薄，模溫變化均需依靠熟練的操作人員不斷調節匹配，因此膠合質量不穩定，產品不合格率偏高，變成廢料造成損失。 2.本機使用超高靈敏火花防止器，機器能在火花產生的瞬間切斷高周輸出，減少模具燒損的現象發生（在正當操作情況下，基本不損傷模具）。 3.本機采用雙壓床設計，即在A床膠合完成進入冷卻階段，B床便可以進行膠合作業。如此AB床不斷交互使用用一振蕩器，大大提高振蕩器的使用效率，以節省機器的設置空間。 4.本機采用世界上*的方型高Q值發振器，具有發振頻率穩定，輸出功率高，諧波量少的優點。 *生產速度：如皮料的熔接寬度在310MM-640MM之間的，速度在20秒/模。用途：適用于貼合厚膠布接駁。適用于各種含PVC成份的皮料、厚度的皮革，皮帶，輸送帶，跑步帶的貼合和接駁和熔接。 Double belt seamless high-frequency welding machine; this machine is double-headed running with a special welding machines, two working heads turn, improve production efficiency, high-frequency output stability, and finished product rate. Pressure welding belt running out of a solid and beautiful. Maintain the bonding formation of the original skin sample, Features: 1. The use of advanced automated systems the same tune. As long as the pre-set current value and a good bonding time, the system based on current feedback signal auto - Regulation, will not be glued current thickness change and mold temperature rise. Therefore, product quality is stable, can easily serve as a general operator, unlike the ordinary firing frequency gluing machine, material thickness, mold temperature changes are required to rely on skilled operators constantly adjust match, so gluing inconsistent quality, the product failure rate high become waste losses. 2. This machine to prevent the use of ultra-high sensitivity spark device, the machine can produce sparks which could cut off the high-cycle output of the moment to reduce the mold burnout phenomenon （in the proper operating conditions, basically does not damage mold）. 3. This machine adopts double-press-bed design, that is, the completion of A-Bed glued into the Cooling Stage, B-bed operation can be glued. AB-bed continuous interactive use of such an oscillator with greatly enhanced efficiency of the oscillator in order to save settings for the machine room. 4. This machine adopts the world's advanced high-Q square vibration hair with hair vibration frequency stability, output power of high harmonic less advantages. * Production speed: leather materials, such as welding 310MM-640MM width between the speed at 20 sec / mold. Uses: Suitable for fit-thick tape feeder. Applicable to all kinds of ingredients containing PVC leather material, the thickness of leather, belts, conveyor belt, treadmill belt fitting and the connection and weld