注塑機 擠出機 造粒機 吹膜機 吹塑機 吹瓶機 成型機 吸塑機 滾塑機 管材生產線 板材生產線 型材生產線 片材生產線 發泡設備 塑料壓延機
上海微百科技發展有限公司
上海微百科技發展有限公司
德國OME產，注射器VP9101進樣泵，主要可以內置到儀器內部，通過計算機協議控制，定量分配液體溶劑。目前只提供單通道，三通閥控制，一個泵控制一個液體。固定行程30mm
德國OME產VP9101 進樣泵注射泵，注射器參數
| 電壓要求: | 供應電壓: | 24VDC ± 5V | |
| 電流: | Max.1A | ||
| zui大負荷: | 3000 steps | ||
| 活塞驅動: | 原理: | Quad encoder for loss of steps, detection of loss steps with error message | |
| l額定行程: | 30mm | ||
| 活塞速度: | 1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing) | ||
| 進樣管: | 類型： | XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml | |
| 精度: | 0.05% CV within run at full stroke (for 1000µl syringe and above) | ||
| 錯誤率: | <1.0% at full stroke | ||
| 流動接觸: | Glass, PCTFE and Teflon | ||
| 閥/閥驅動: | 閥的選項: | 120° 3-port distribution | |
| 運行時間: | 250ms between adjacent ports | ||
| 驅動: | Stepper motor with optical sensor for position detection | ||
| Positions: | Input, output, bypass | ||
| 材料: | Plug: virgin teflon Body: PCTFE | ||
| 適合接口: | 1/4-28"-UNF screw fitting for syringe | ||
| 閥連接 | |||
| 螺絲紋接頭 | |||
| 螺紋 | 管徑 | 貨號 | |
| M6 | 3.2mm(1/18") | 4130005 | |
| 1/4x28" | 3.2mm(1/18") | 4130020 | |
| M6 | 1.6mm(1/16") | 4130016 | |
| 1/4x28" | 1.6mm(1/16") | 4130019 | |
| M6 | 2.7mm | 4130004 | |
| 1/4x28" | 2.7mm | 4130025 | |
| Female luer Caps,10 per Pack | 2702206 | ||
| 螺絲紋接頭墊片 | |||
| 為管徑 | 為貨號 | ||
| 3.2mm | 4132032 | ||
| 1.6mm | 4132016 | ||
| 2.7mm | 4132031 | ||
| 通訊接口: | 類型: | RS 232, RS 485 or CAN bus | |
| 通訊速率: | 9.600 or 38.400, 100K or 125K (CAN bus) | ||
| 格式: | Data bits: 8 parity: none Stop bits: 1 half duplex | ||
| 地址撥碼: | up to 15 XP/AL devices can be addressed individually | ||
| 信息: | Data terminal and OEM protocol | ||
| Firmware: | Programmable ramps, cutoffs, backlash compensation, plunger speeds, delays and loops Arbitrarily selectable plunger speed Clearance compensation Absolute and relative positions Diagnostics Flash-PROM | ||
| 環境溫度: | 溫度: 17-37°C 濕度: 10-85% Non condensing RH at: 5°C-40°C | ||
| 尺寸: | 高度: | 127mm (+)1mm | |
| 寬度: | 45mm (+)1mm | ||
| 深度: | 113mm | ||
| 重量: | 1.2kg | ||
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
塑料機械網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
