| 煉膠機 Application:The mill is used for rubber. 用 途：本機可供橡膠的塑煉、混煉、熱煉和壓片用 結構簡述：本機主要用輥筒、機架、軸承、調距裝置、加熱冷卻系統、事故停車裝置、潤滑系統和電氣控制系統等部分組成。主電機經減速機、驅動齒輪及速比齒輪驅動輥筒相對運轉。 特 點：1、輥筒用合金冷硬鑄鐵制成，工作表面具有較高的硬度，耐磨耐用。輥筒內腔可通入蒸汽或冷卻水以便調節輥筒的工作溫度，以滿足煉膠工藝的要求。 2、輥距的調節為手動，調距準確靈敏。 With Way:The this aircraft mainly for the rubber plasticization, the mixed iron-smelting, hotly builds up the use. General Design:The mill consists mainly of rolls,frame,bearings.roll nip adjusting screws,heating and cooling device,emergency stop,lubrication system and such sections as electrical controls and,etc. The main electric motor arrives the front and rear rolls to rotate opposiy through reducer.driving gears and friction gears Features:1、The rolls are made of chilled alloyed cast iron.Their working surfaces are of high hardness and wear-resistant.The working temperature of the bored rolls is controllable steam or cooling water that pass through them thus,to meet the requirements of milling process. 2、Roll nip adjustment is realized by hand operation which can obtain high accuracy and sensitivity. 主要技術參數 Technical Specifications | 項目 規格 | XK-160 | XK-250 | XK-360 | XK-400 | XK-450 | XK-560 | | 輥筒直接 Roller Diameter mm | 160mm | 250mm | 360mm | 400mm | 450mm | 560mm | | 輥筒工作長度 Roller Length mm | 320mm | 620mm | 900mm | 1000mm | 1200mm | 1530mm | | 輥筒速比 Roller Ratio | 1:1.35 | 1:1.10 | 1:1.25 | 1:1.27 | 1:1.27 | 1:1.27 | | 電機功率 Main Power kw | 7.5kw | 18.5kw | 30kw | 40kw | 55kw | 90kw | | 重量 Weight kg | 1t | 2.5t | 6t | 7.8t | 12.5t | 17.5t | | 外型尺寸（L×W×H） Overall Dimension cm | 1.16×1.92×1.37m | 3.22×1.5×1.29m | 1.92×1.65×1.725m | 4.3×1.7×1.8m | 5.05×1.9×1.88m | 5.37×1.95×2.19 | | 
